Why lithium-ion batteries die so young

The death of a battery: weve all seen it happen. In phones, laptops, cameras, and now electric cars, the process is painful and if youre lucky slow. Over the course of years, the lithium-ion battery that once powered your machine for hours (days even!) will gradually lose its capacity to hold a charge. Eventually youll give in, maybe curse Steve Jobs, and then buy a new battery, if not a whole new gadget.

But why does this happen? Whats going on in the battery that makes it give up the ghost? The short answer is that damage from extended exposure to high temperatures and a lot of charging and discharging cycles eventually starts to break down the process of the lithium ions traveling back and forth between electrodes.

The longer answer, which will take us through a description of unwanted chemical reactions, corrosion, the threat of high temperatures, and other factors affecting performance, begins with an explanation of what happens in a rechargeable lithium-ion battery when everythings working well.

Lithium-ion Battery 101

In a typical lithium-ion battery, well find a cathode, or positive electrode, made out of a lithium-metal oxide, such as lithium cobalt oxide. Well also find an anode, or negative electrode, which today is generally graphite. A thin, porous separator keeps the two electrodes apart to prevent electrical shorting. And an electrolyte, made of organic solvents and lithium-based salts, allows for the transport of lithium ions within the cell.

During charging, electric current forces lithium ions to move from! the cat hode to the anode. During discharging (in other words, when you use the battery), ions move back to the cathode.

Daniel Abraham, a scientist at Argonne National Laboratory leading research into how lithium-ion cells degrade, compared this process to water in a hydropower system. Moving water uphill requires energy, but it flows downhill very easily. In fact, it delivers (kinetic) energy, said Abraham. Similarly, a lithium cobalt oxide cathode, does not want to give up its lithium, he said. Like moving water uphill, it requires energy to take lithium atoms out of the oxide and load them into the anode.

During charging, ions are forced between sheets of graphene that make up the anode. But as Abraham put it, they dont want to be there. When they get a chance, theyll move back, like water flowing downhill. Thats discharging. A long-lasting battery will survive several thousand of these charge-discharge cycles, according to Abraham.

When Is a Dead Battery Really Dead?

When we talk about dead batteries, its important to understand two performance metrics: energy and power. For some applications, the rate at which you can get energy out of the battery is very important. Thats power. In electric vehicles, high power enables rapid acceleration and also regenerative braking, in which the battery needs to accept a charge within a couple seconds.

In cell phones, on the other hand, high power is less important than capacity, or how much energy the battery can hold. Higher capacity batteries last longer on a single charge.

Over time, the battery degrades in a number of ways that can affect both power and capacity, until eventually it simply cant perform its basic functions.

Think of it in terms of another water analogy: Charging a battery is like filling a bucket with water from a tap. The volume of the bucket represents the batterys energy, or capacity. The rate at which you fill itturning the tap on full blast or just a trickleis the power. But time, high temperatures, extensive cycling and other factors end up creating a hole in the bucket (dear Liza, dear Liza).

In the bucket analogy, water leaks out. In a battery, lithium ions are taken away, or tied down, said Abraham. Bottom line, theyre prevented from going back and forth between the electrodes. So after a few months, the cell phone that initially required a charge only once every couple of days now needs a charge every day. Then its twice a day. Eventually, after too many lithium ions have been tied down, the battery wont hold enough of a charge to be useful. The bucket will stop holding water.

Why does this happen? Well, in addition to the chemical reactions that we want to happen in the battery, there are also side reactions. Barriers arise that impede the motion of lithium ions. So the electric car that went, say, zero to 60 in five seconds off the lot, will take eight seconds after a few years, and maybe 12 seconds after five years. All the energy is still there, but it cant be delivered fast enough, said Abraham. The ions run into roadblocks.

What Breaks Down and Why

The active portion of the cathode (the batterys source of lithium ions) is designed with a particular atomic structure, for stability and performance. When ions are removed, sent over to the anode, and then inserted back into the cathode, we ideally want them to return to the same spot, in order t! o preser ve that nice stable crystal structure.

Problem is, the crystal structure can change with each charge and discharge. An ion from Apartment A doesnt necessarily come home but could instead insert itself into Apartment B next door. So the ion from Apartment B finds her place occupied by this drifter and, not being one for confrontation, decides to take up residence down the hall. And so on.

Gradually, these phase changes in the material transform the cathode to a new crystal structure, with different electrochemical properties. The particular arrangement of atoms, which enabled the desired performance in the first place, has been altered.

In hybrid vehicle batteries, which only need to provide power during acceleration or braking, noted Abraham, these structural changes occur much more slowly than in electric vehicles, because only a small fraction of lithium ions in the system move back and forth in any given cycle. As a result, he said, its easier for them to return to their original locations.

Problem of Corrosion

Degradation can occur in other parts of the battery as well. Each electrode is paired with a current collector, which is basically a piece of metal (typically copper for the anode, aluminum for the cathode) that gathers electrons and moves them to an external circuit. So you have slurry made from an active material like lithium cobalt oxide (which is ceramic and not a very good conductor), plus a glue-like binder painted over this piece of metal.

If the binder fails, the coating can peel off the current collector. If the metal corrodes, it cant move electrons as efficiently.

Corrosion within the battery cell can result from an interaction between the electrolyte and electrodes. The graphite anode is highly reducing,! which m eans it gives up electrons easily to the electrolyte. This can produce an unwanted coating on the graphite surface. The cathode, meanwhile, is highly oxidizing, which means it easily accepts electrons from the electrolyte, which in some cases can corrode the aluminum current collector or form a coating on the cathode particles, Abraham said.

Too Much of a Good Thing

Graphite the material commonly used to make an anode is thermodynamically unstable in an organic electrolyte. What that means is the very first time our battery is charged, the graphite reacts with the electrolyte. This forms a porous layer (called a solid electrolyte interphase, or SEI) that actually protects the anode from further attacks. This reaction also consumes a little lithium, however. So in an ideal world, we would have that reaction occur once to create the protective layer, and then be done with it.

In reality, however, the SEI is a sadly unstable defender. It does a good job protecting the graphite at room temperature, said Abraham, but at high temperatures or when the battery runs all the way down to zero charge (deep cycling) the SEI can partially dissolve into the electrolyte. (At high temperatures, electrolytes also tend to decompose and side reactions accelerate.)

When friendlier conditions return, another protective layer will form, but this will eat up more lithium, giving us the same problem we had with the leaky bucket. Well have to recharge our cell phone more often.

Now, as much as we need that SEI to protect the graphite anode, there can be too much of a good thing. If the layer thickens too much, it actually becomes a barrier to the lithium ions, which we want to flow freely back and forth. That affects power performance, which is, as Abraham emphasi! zed, ext remely important for electric vehicles.

Building Better Batteries

So, what can be done to make our batteries last longer? In the lab, researchers are looking for electrolyte additives to function like vitamins in our diet, enabling the battery to perform better and live longer by reducing harmful reactions between the electrodes and electrolyte, said Abraham. Theyre also seeking new, more stable crystal structures for the electrodes, as well as more stable binders and electrolytes.

Engineers at battery and electric car companies, meanwhile, are working on the battery pack and thermal management systems to try and keep lithium-ion cells within a constant, healthy temperature range. The rest of us, as consumers, can avoid extreme temperatures and deep cycling, and for now keep grumbling about those batteries that always seem to die too soon.

Image courtesy of Argonne National Labs, felixtsao, warrenski, MitchClanky2008, bizmac.

Related content from GigaOM Pro (subscription reqd):